The Condair CP2 generation is backed by the experience acquired with the concepts of graduated product sizes and the supply of a specific quantity of steam in kg per hour. The successful principle of the Condair CP has taken another step forward with this development.

The desired steam capacity is specified in an initial broad range of the three basic units. The precise steam capacity in kg/h is controlled by the individually programmed CP2-Chip. This gives tailored steam performance in the true sense of the word for the customer's benefit.

The proverbial modularity is rounded off perfectly by accessories for adjustment to customers' specific applications.

Basic Units

The small basic unit supplies a steam capacity of 1 to 4 kg/h either via a built-in ventilation device for direct room humidification or with a steam nozzle/distribution pipe for duct application. An optional capacity display including a continuous control can also be built in.

The medium-sized basic unit permit steam production from 5 to 8 kg/h or from 9 to 15 kg/h, depending on the cylinder type. The steam is distributed by means of the Condair FAN ventilation unit or by steam distribution pipes. The devices can be supplemented by the optional M3 or M4 modules.

The large basic unit generates 16 to 25 kg/h or 26 to 45 kg/h, depending on the cylinder type. Higher steam capacities of up to 180 kg/h are built up using "slave" units. Steam is introduced into the room by the Condair FAN or via steam distribution pipes into duct systems. M3 or M4 modules are optional available.

¿Existe un interés o una necesidad concreta?
Entonces no vacile en ponerse en contacto con nosotros para pedir una oferta detallada.

Contacto: beatrice.buergi@waltermeier.com »