Simply connect the Condair CP3 D steam bath to your drinking water supply systema: Without any additional water treatment it will produce hygienic steam and mix it with the air in the cabin. Accurate control of steam quantity and temperature is possible.

Why the Condair CP3 D steam bath?

Relaxing:
Ensure the ultimate chill-out experience for your guests: A steam bath is mentally and physically relaxing without putting two much stress on the body due to great temperature differences.

Health:
The humid and warm air has a preventive effect against colds. At a recommended temperature of 45°C (± 5°C), people should stay in the bath for 15 to 20 minutes.

Comfort:
The Condair CP3 D steam bath can be operated from the hotel reception desk if desired. Your guests are not required to do anything.

Drinking water is sufficient:
The Condair CP3 D steam bath made of high-quality materials has a long service life and requires little maintenance. Thus many weeks will pass until the next maintenance session, and your guests can enjoy and relax without any disturbance.

Tailor-made:
Steam and fragrant quantities will responds promptly to your pre-set values in the menus. This means you can meet your guests’ wishes without delay.

But that’s not all! A variety of settings can be configured using the software which make steam bath use even simpler:

Manual control ON/OFF Manual light switching ON/OFF Short-term timer Week timer Modbus (RS485) Fan (1 or 3-stage) Fan post-drying period (settings from 1 – 60 min.) Temperature setting (settings from 20 °C – 55 °C) “Steam bath door open” door switch (settings from 1 – 30 min.) Damper actuator ON/OFF